Do you have a question? sales@signdepot.eu+3657 506510 Mon–Fri: 8–16
The new SD BASIC hot and cold laminator has arrived! 1630mm wide coil width with pneumatic system.
Hot and cold laminator with lots of useful options
SD BASIC roll laminators are manufactured to our own needs and marketed under our own brand name. The SD BASIC 1600HC provides high quality lamination, whether it's cold lamination or hot lamination! The reasonable and professional roll feeding and winding system ensures stable and error-free lamination when laminating roll materials! The antistatic system protects against the unpleasant discharges that you have already experienced as an advertising decorator, e.g. For PVC lamination. The SD BASIC 1600HC is a two-in-one laminator: it can be used for both cold lamination and hot lamination from 0 to 60 ° C. Hot laminators are activated above 30 ° C.Unique features:
Roller shaft
One of the top roll holders automatically winds up the excess paper. The two rollers are connected so that the substrate collection starts automatically when the lamination is started.
Antistatic cord
The antistatic cord eliminates most of the charge during fast lamination. After the electrical drainage accessories placed on the laminator and proper grounding, there is no need to be afraid of electrical discharges.
Tension handle
The tension handle makes it easy to adjust and provides the right tension for different media.
Pneumatic cylinder pressure adjustment
Compared to manual hand roller lifting, the pneumatic solution provides consistent pressure even when laminating boards of different thicknesses.
Cold and hot lamination, lamination. All functions in one machine!
The SD BASIC 1600HC has both cold lamination and hot lamination functions. For cold lamination you can use the low temperature setting without heating. In hot lamination mode, a maximum temperature of 60 ° C can be set in 1 degree increments. A degree of 60 ° C is sufficient for all known roll hot laminating films. Typically, only 30 ° C and 50 ° C will be required. The front and back short table tops will help you when laminating. Of course, for larger boards, it is advisable to feed the board from the table to the laminator. Up to 28mm thick board material can be laminated.
Cold lamination, heated cold lamination, hot lamination ... how is that ?!Most cold laminating machines are "cold" because the normal self-adhesive cold laminating film only needs to be laminated to the surface of the printed material. The result is satisfactory, but in some media the lamination is noticeable on the print, not perfectly transparent. Heating at 40-50 ° C softens the cold laminating film, making it even more perfect for printing. A temperature of about 40-50 ° C is sufficient for crystal clear, bubble-free lamination. Therefore, it is better with the SD 1600HC heating function than a cold laminator without heating. Hot laminating films melt at high temperatures and adhere to the surface without glue. Depending on the film type, approx. 20 - 60 ° C required.
SD BASIC 1600HC:
Warranty: 1 year
Service, spare parts supply: by our company, during and after the warranty period.
Shipping and training: Free.